CLIVET WDAT-iL3 250.2, Инструкция по установке и эксплуатации

Страница: 46 / 58

46 WDAT-iL3 250.2-580.2 M04Z40C18-02
12 General technical data - Performance
Acoustic configuration: compressor soundproofing (SC)
Size 250.2 280.2 320.2 360.2 400.2 420.2 440.2 480.2 540.2 580.2
Cooling
Cooling capacity 1 [kW] 558 618 715 804 904 957 1000 1080 1173 1286
Compressor power input 1 [kW] 185 209 232 261 288 327 331 369 390 431
Total power input 2 [kW] 197 223 248 280 310 350 353 396 417 458
Partial recovery heating
capacity
3 [kW] 112 124 142 160 179 193 200 217 234 258
EER 1 - 2,84 2,77 2,88 2,87 2,92 2,74 2,83 2,73 2,81 2,81
Water flow-rate (User Side) 1 [l/s] 26,7 29,5 34,2 38,4 43,2 45,7 47,8 51,6 56,0 61,5
Internal exchanger pressure
drops
1 [kPa] 55 47 43 34 48 54 49 37 45 55
Cooling capacity
(EN14511:2013)
4 [kW] 556 616 712 802 902 954 997 1077 1169 1282
Total power input
(EN14511:2013)
4 [kW] 199 225 251 282 311 353 357 398 421 463
EER (EN 14511:2013) 4 - 2,80 2,74 2,84 2,84 2,90 2,71 2,79 2,71 2,78 2,77
SEER 6 - 4,63 4,57 4,59 4,61 4,68 4,68 4,67 4,72 4,77 4,79
SEPR 7 - 5,24 5,27 5,04 5,20 5,25 5,30 5,30 5,32 5,25 5,23
Cooling capacity (AHRI
550/590)
5 [kW] 555 615 710 799 898 950 986 1077 1159 1270
Total power input (AHRI
550/590)
5 [kW] 196 220 247 279 319 348 350 392 414 454
COPR 5 - 2,84 2,80 2,87 2,87 2,82 2,73 2,81 2,75 2,80 2,80
IPLV 5 - 5,04 5,03 5,01 5,01 5,06 5,12 5,08 5,18 5,20 5,20
1. Data referred to the following conditions: internal exchanger water = 12/7 °C. Entering external exchanger air temperature 35°C. Evaporator fouling factor = 0.44 x 10^(-4) m2 K/W.
2. The Total Power Input value does not take into account the part related to the pumps and required to overcome the pressure drops for the circulation of the solution inside the exchangers.
3. Recovery exchanger water=40/45°C
4. Data compliant to Standard EN 14511:2013 referred to the following conditions: internal exchanger water temperature = 12/7°C. Entering external exchanger air temperature = 35°C
5. Data compliant to Standard AHRI 550/590 referred to the following conditions: internal exchanger water temperature = 6,7 °C. Water flow-rate 0,043 l/s per kW. Entering external exchanger air temperature 35°C. Evaporator
fouling factor = 0.18 x 10^(-4) m
2
K/W
6. Data compliant to Standard EN 14825:2016
7. Data compliant according to EU regulation 2016/2281