HCS QUAD PEDESTAL KIT INSTALLATION GUIDE
ClipperCreek
,
Inc.
Page 6
TOOLS REQUIRED FOR ASSEMBLING THE QUAD
PEDESTAL KIT (HCS Series EVSE)
The following tools are required for the installation and assembly of the pedestal components.
• L-shape T27 Torx Driver, in a variety of lengths for faster assembly.
(Alternatively, a ratcheting driver
can be used. If using a powered screwdriver, set it to a low torque value.)
• #2 Phillips Head Screwdriver
• 5/16” Hex Head Wrench
• Box Wrench (appropriately sized for the Anchor Nuts)
• Preferred tool to cut flexible conduit
• Tape measure
