HCS QUAD PEDESTAL KIT INSTALLATION GUIDE
ClipperCreek
,
Inc.
Page 10
1. Concrete Pad Requirements
The location, dimensions, and composition of the concrete
pad underlying the pedestal should always adhere to local
building codes. The following dimensions are minimum
recommended values. Always verify that installation plans
adhere to local code requirements prior to proceeding.
• The pad area must be a minimum of 18” to a side.
• The concrete must be poured a minimum depth of 18”.
• If there is no bumper block, the center of the pedestal
base should be situated 36” behind the curb.
• If a bumper block is in place, the center of the pedestal
base should be situated 12” behind the curb.
2. Anchor Bolt Placement
A minimum of four (4) anchor bolts must be embedded in
the concrete pad for the purposes of securing the pedestal
post.
Maximum Anchor Bolt Height
•
The anchor bolts should not protrude more than 3” above
the surface of the concrete pad and must be at least 1.5”
above the surface of the concrete pad to compensate for
the added height of the base stiffeners. (This only applies
if installing the optional Extension Kit).
Use the Pedestal Base Pattern Template:
•
To better facilitate the installation of the anchor bolts, a
cardboard template in the shape of the pedestal base is
included in the pedestal kit. This template is provided as
a knock-out piece on the back of the cardboard box in
which the EVSE mounting plate is packaged. The base
pattern is shown in
Figure 5.
Standard 10” x 10” Square Pattern:
• Arrange four (4) 1/2” or 3/8” anchor bolts in a 10” square
pattern. This placement corresponds to the ‘A’ labels
shown in
Figure 5
.
Alternate 5.25” x 11.1” Rectangular Pattern:
• Arrange four (4) 3/8” anchor bolts in a 5.25” by 11.1”
rectangular pattern. This placement corresponds to the
‘B’ labeled (preferable) or ‘C’ labeled (if necessary)
inner cutouts in the pedestal base. See
Figure 5
.
Figure 4: Proper Distance from the Curb
Figure 5: Bolt Pattern Template
12” with Bumper or
36” without Bumper
A
A
A
A
B
B
B
B
X
C
C
C
C
X
X
X
Do not place bolts where ‘X’ labels are shown IF
USING THE EXTENSION KIT.
Your configurations may vary slightly from what
is depicted in this manual.
INITIAL PEDESTAL INSTALLATION
