HCS Optional Features User Manual
14
Share2 Enabled HCS
Share2 allows two EVSE to share power supplied by one
circuit breaker.
When only one EVSE is charging a vehicle,
the full charging capacity is available to that vehicle. When both
EVSE are charging vehicles, each EVSE will offer 50% of the
circuit capacity to each vehicle (thus “sharing” the circuit breaker).
The Share2 EVSE will have either a 15, 8 or 10 wire harness.
Please refer to the Wiring Instructions for either the 15, 8 or 10
wires dependent on the particular harness configurations.
These
harnesses have different color wires so it is important to follow
the correct instructions per 15, 8 or 10 wire counts.
CAUTION: DO NOT STRIP WIRES THAT ARE
UNUSED.
ATTENTION: NE PAS DÉPOUILLER LES FILS
INUTILISÉS.
ATENCIÓN: NO CORTE LOS CABLES SI NO
LOS ESTÁ UTILIZANDO.
Share2 Wiring Instructions: 15 Wire Harness
Follow the Wiring Diagram in
Figure 5
for proper wiring of a
Share2
that utilizes a 15 wire harness. Wiring connections can
be made in a junction box or pedestal body.
Strip the Orange/
BK, Orange, and White/BK wires ONLY.
Use wire nuts (not
included) to secure the Orange/BK and Orange wires to the
opposing White/BK wire as indicated by the black dots in
Figure 5
.
NOTE:
Wires with black dotted markings are referenced
with "/BK" and wires with white dotted markings are
referenced with "/WH."
