Clipper BBH255, Руководство пользователя

Страница: 4 / 29

3
I. PEPARATION
A. Assembly
Inspect the saw for shipping damage. If any damage is found, contact the shipper
immediately and file a freight claim. The Norton Company is not responsible for
any freight-related damages.
1. Remove machine from skid.
2. Remove band securing head in place. Remove packing material.
3. Raise cutting head from shipped position by using the hand wheel.
4. Remove the water pump and water pump bracket from carton. Clip water
pump bracket to rear of pan and insert water pump into bracket.
5. Connect electrical outlet from water pump to electrical outlet rear of motor.
6. Attach water hose to water pump. Route water hose by passing hose behind
pivot bar.
7. Remove the conveyor cart and guide from the carton and install on the pan.
8. Remove the drain plug from the carton and place in the drain hole opening
located in the bottom of the pan.
9. Check the owner’s manual for the wiring connection and the proper electrical
hook-up before starting the saw.