Clipper BBH255, Руководство пользователя

Страница: 8 / 29

7
II. OPERATION
The best cutting speed and economy can be attained by following the instructions listed in
this section and by selection of the right blade for the right job. Your local distributor can
provide accurate blade recommendations to meet all cutting needs.
A. SAFETY PRECAUTIONS
Important: The following safety precautions must be observed.
1. Before mounting any blade on the saw, the blade should be inspected for any damage which
might have occurred during shipment, handling or previous use.
2. The blade shaft collars and arbors should be cleaned and examined for damage before mounting
the blade.
3. When tightening the blade retaining bolt against the outside blade shaft collar, be sure to tighten
enough to hold the blade firmly without slipping, but do not over tighten.
4. Adequate coolant must be used for wet cutting abrasive and diamond blades.
5. The blade must be operated within the specified maximum operating speed.
6. The operator should wear safety glasses, ear plugs, dust mask, and any other appropriate safety
equipment.
7. When starting the saw, the operator should stand away and to the side of the machine.
8. During cutting, the work piece must be held securely and prevented from twisting or slipping. The
blade must not be forced into the material with excessive pressure.
9. The blade guard must always be in place before running the saw.
10. Make sure the lock pins are in place before running the saw.
Used Approved:
Eye Protection Hearing
Protection
Respiratory
Protection
Head Protection