CLIPIC LH125-12, Руководство пользователя, Страница: 76 / 110

77
Fuel and engine oil
FUEL AND ENGINE OIL
FUEL CAP (OIL TANK CAP)
The capacity of oil tank is 14L.
Insert the key into key hole and turned clockwise to open the
oil tank cap. Petrol to be used is over 90#.
To install it, put the transverse bar into cap, put the key seat
into the neck of injection oil hole, and push the oil tank cap
into the injection oil hole until it is combined with the folding
of injection oil hole. Take out the key and close key hole cap.
FUEL VALVE
Fuel valve is under the left of oil tank. When valve is turned
to ‘OFF’, fuel supply would be stopped. When motorbike isn’t
driven, it should be adjusted to the position.
It is the position that you drive normally when fuel valve is
pushed to ‘ON’ (On this position, petrol can flow into car-
burettor).
When the fuel valve is set to ‘RES’ petrol could be streamed
out of oil tank.
2
1
ON OFF RES
RADAR ANG-CAS.indd 77 RADAR ANG-CAS.indd 77 08/09/2005 11:54:51 08/09/2005 11:54:51