5
Based on Software Version 1.31.1. Content subject to change without notice. Check www.clintonelectronics.com for the most current manual.
Step 1.
Press the
ENTER
button on the included remote
to get started
.
Step 3.
After successful network connection, the
device will test it’s Internet Connection and ping
the Clinton Connect Server. Both tests must pass to
proceed with the setup.
INITIAL SETUP
Step 2.
Choose a Wifi Network from the list, enter the
password, and select
Join
.
Step 4.
Hold the QR code in front of the Connect PVM
camera to scan. If the code does not scan, you can also
enter it manually.
*Hardwired devices will automatically skip this step
ATTENTION:
This device requires a network connection with access to the internet to complete the
initial setup.
