Clinch Rivets CR-2, Инструкция по эксплуатации

Страница: 7 / 11

Page 7 of 11
Operating Instruction:
1. Connect the air supply, switch ON/OFF vale (48) to ON position. (See figure 1)
2. Adjust the vacuum security system clockwise or counter-
clockwise. Air suction will allow the rivet to be held in any orientation.
(See figure 2)
Attention: If you don’t want to use vacuum system, you can turn
vacuum security system clock wise and turn it off.
3. Direct the riveter with rivet to the hole and then pull the trigger. The stems
automatically reverse to the collector and the rivet is set.
Fig 1
Fig 2