Climit 24 BF, Инструкция пользователя

Страница: 93 / 152

93
EN
8 MAINTENANCE
8.1 Adjustments
For the appliance to operate correctly and efficiently it is recom-
mended that the User calls upon the services of a Professionally
Qualified Technician to carry out ANNUAL maintenance.
m
CAUTION
The maintenance interventions described must ONLY be
carried out the professionally qualified personnel.
a
WARNING
Before carrying out any interventions described:
– set the main system switch to "OFF"
– close the gas valve
– make sure that no hot parts inside the appliance are
touched.
OFF
Fig. 64
8.2 External cleaning
8.2.1 Cleaning the cladding
When cleaning the cladding, use a cloth dampened with soap and
water or alcohol for stubborn marks.
d
IT IS FORBIDDEN
to use abrasive products.
8.3 Cleaning the inside of the appliance (
24 OF
)
8.3.1 Cleaning the heat exchanger
To clean the heat exchanger:
– remove the screws (1), pull the front panel (2) forwards and re-
lease it from the top by lifting it
1
2
Fig. 65
– remove the four screws (3) and remove the front panel (4) from
the combustion chamber working carefully so as not to damage
the gasket or the panel insulation
3 4
5
6
Fig. 66
– if there is any dirt on the heat exchanger (5) fins, protect the
burner elements (6) covering them with a sheet of newspaper
or a cloth and brush the heat exchanger (5) clean.
8.3.2 Cleaning the burner
The burner does not require any particular maintenance simply
dust it with a soft brush.
8.3.3 Checking the ignition/detection electrode
Check the state of the ignition/detection electrode and replace if
necessary. Check the measurements as per the drawing whether
the ignition/detection electrode is replaced or not.
= =
3,5mm
+0,5 -0,5
Fig. 67
m
CAUTION
The position of the electrode is essential for the correct
detection of current ionization.