CLIMIA CMG 100 Скачать руководство пользователя страница 4

4

CLIMIA

General safety notes

Carefully read the operating manual 
before placing the unit in service 
for the first time. It contains useful 
tips and notes as well as hazard 
warnings to prevent injury or 
material damage. Failure to follow 
the directions in this Manual can 
endanger persons, the environment 
and the equipment itself and will 
void any claims for liability.

 

The product is not a toy. Keep it 
away from children and pets.

 

Do not leave the packaging 
material carelessly lying around. 
This could become hazardous to 
children.

 

Protect the product from extreme 
temperatures, direct sunlight, 
strong vibrations, excessive 
humidity, moisture, flammable 
gases, vapours and solvents. 

 

Do not expose the product to 
mechanical stress.

 

If safe use is no longer possible, 
take the product out of service 
and secure it against accidental 
use. Safe use is no longer 
guaranteed if the product: 
- exhibits visible damage, 
- no longer functions properly, 
- has been stored for a 
longer period of time under 
unfavourable environmental 
conditions or 
- has been subjected to 
considerable transport stresses.

 

Handle the product with care. It is 
damaged by bumps, impacts or 
falling from even a low height.

 

Consult a professional if you have 
any doubts about the operation, 
safety or connection of the 
product.

 

Have maintenance, adaptation 
and repair work carried out 
exclusively by a specialist or a 
specialist workshop.

 

If you still have questions that are 
not answered in this operating 
manual, please contact our 
technical customer service or 
other professionals.

1.0 Safety information

Battery/rechargeable battery

 

When inserting the battery / 
rechargeable battery, ensure 
that the polarity is correct.

 

Remove the battery / 
rechargeable battery if you are 
not going to use the unit for a 
long time to avoid damage due 
to discharge. Discharging or 
damaged rechargeable batteries 
can cause acid burns if they 
come into contact with the 
skin. You should therefore wear 
protective gloves when handling 
damaged batteries/rechargeable 
batteries.

 

Keep rechargeable batteries out 
of the reach of children. Do not 
leave rechargeable batteries 
lying around as they could be 
swallowed by children or pets.

 

Do not disassemble, short circuit 
or dispose of rechargeable 
batteries in fire. Never attempt 
to charge non-rechargeable 
batteries. There is a risk of 
explosion!

The following notes must be 

observed in full:

People and product

 

If the unit is brought from a 
cold to a warm environment, 
condensate water may form 
inside the unit. This can lead to 
incorrect measurement results. 
Before using the unit, let it rest 
for a while until it has adapted to 
the new ambient air.

 

The user is responsible for 
the measurement results 
of this unit. We do not 
guarantee the accuracy of 
the measurement results, nor 
do we accept responsibility for 
them. Under no circumstances 
do we accept responsibility 
for damage caused by the 
application of the measurement 
results.

Содержание CMG 100

















Отзывы: