23/28
2015/12 - Indice de révision : B - Code : 33491
•
In heating only mode:
To display the temperature set point, press one of the arrow keys (
or
) once. While the set point is
flashing, press the arrow keys (
and
) to increase or decrease the set point temperature in increments
of 1°C. The screen will automatically revert to the default display after 8 seconds of inactivity.
•
In dehumidifi heating mode:
Press one of the arrow keys (
or
) once, and then press the
button to display the temperature set
point. Select the desired set point as described above.
As soon as the ambient temperature measured by the machine drops at least 1°C below the set point, the
element will start to heat. Heating will stop as soon as the ambient temperature measured by the machine
rises at least 1°C above the set point.
Programming a delayed start or a delayed stop:
A delayed stop can only be programmed while the machine is running.
Press the
button.
Using the arrow keys
or
, select a shut down delay of between
1
and
12
hours maximum (one hour
increments).
Allow the screen to return to the default display.
The
OFF
symbol appears in the bottom of the screen, confirming that the
OFF
operation has been
registered and that the machine will shut down after the programmed delay.
A delayed start can only be programmed while the machine is off.
Press the
button.
Using the arrow keys
or
, select a start up delay of between
1
and
12
hours maximum (one hour
increments).
Allow the screen to return to the default display.
The
ON
symbol appears in the bottom of the screen, confirming that the
ON
operation has been registered
and that the machine will start after the programmed delay.
To cancel a delayed start or strop, press the
button to display the delay (it will begin to flash), now press
the On/Off button (the machine will either start or stop depending on its current status).
Setting the fan speed:
While the machine is running, press the
SET
button to select the fan speed: High or Low
