26/28
2015/12 - Indice de révision : B - Code : 33491
Electrical
box
Extract the 4 screws from
the lid of the box
4.
Feed the wire into the box through one of the openings located at the bottom of the box.
5.
Connect the white signal wire to the circuit board at the yellow
bridge on port P4
6.
Connect the earth lug to the earth terminal on the
connector block, over the one already in place.
Connect the neutral lug to the rear neutral pin on the
white terminal. First remove the neutral double lug
already in place. Connect the neutral cable of the
heating element to the rear pin, then reconnect the
double lug to the front pin using one of the two lugs.
7.
Connect the female live lug to the
free male lug of one of the two black
components.
8.
Put the lid of the electrical box back in
position.
9.
Replace the dehumidifier casing and the
screws.
10.
Modify the parameter C1: change the value to 1.
