22
To set the microphone sensitivity from a scale of 1-5.
1 = minimum microphone sensitivity
5 = maximum microphone sensitivity
Answer Incoming Call
Off: VCP-LTE remains silent when there is an incoming call.
Enable(Ring): VCP-LTE will ring when there is an incoming call. Press the
Alarm Button to answer the call.
Enable(Auto-Answer): VCP-LTE will auto-answer an incoming call and open
a full-duplex Two-way communication.
Incoming Call Check Access code:
When set as
“Disable”, VCP-LTE will auto answer an incoming call and open
a full-duplex Two-way communication without checking the Access Code
(default: 1111).
When set as
“Enable”, VCP-LTE auto answer an incoming call (after the first
ring), and wait for the correct Access Code (default: 1111) and
#
key entry
within 15 seconds before it opens a full-duplex Two-way communication. If the
correct Access Code (and the # key) are not entered within 15 seconds, the
system will disconnect the call automatically.
Press sensor button to end call:
Enable: When enabled, pressing the Active Button of RF device (WTR, Fall
Sensor or PB) once will end two-way communication.
Disable: When disabled, pressing the Active Button of RF device will
NOT
end
two-way communication. (Default)
Caller ID:
Caller ID #1 & Caller ID #2
The device will instantly pick up the call if the incoming caller ID matches with
the number(s) programmed in this function.
The device will match the numbers starting from the last digit. For example, if
a number string 321 is programmed, the device will instantly pick up any call
that has a caller ID of 321 as the last 3 digits.
Up to 15 numeric digits are allowed per setting.