Climax KM3000, Руководство по эксплуатации

Страница: 41 / 104

P/N 16325, Rev. 10 Page 29
F
IGURE
4-3. A
XIALLY SPACED KEYWAYS
3. Cut the keyway as described in Section 4.2 on page 25.
4. Reposition the machine to the side of the shaft. Place a level on the side of
the base to verify the machine is 90° to the first keyway.
5. Cut the second keyway.
Do the following to cut keyways 120° apart:
1. Secure the shaft so it will not rotate.
2. Mount the key mill to the top of the shaft as described in Section 3.4 on
page 19.
3. Cut the keyway as described in Section 4.2 on page 25.
4. Using an appropriate angle gauge or block, rotate the shaft 120°. Cut the
second keyway.
5. Again, using an angle block, rotate the shaft 120°. Cut the third keyway.
Do the following to cut keyways 180° apart:
1. Set the key mill level on the side of the shaft. Cut the first keyway.
2. Position the key mill level on the other side of the shaft. Cut the second
keyway.