supervision timer.
When the panel receives signal again from sensor that previously failed supervision.
154 – Water leakage
When the Water Sensor connected to Door Contact set at
Wate
r (@
W
) is triggered.
158 – High Temperature Alarm
When high temperature alarm is triggered.
159 – Low Temperature Alarm
When low temperature alarm is triggered.
162 – CO Alarm
170 – High Power Consumption
When high power consumption alarm is triggered.
171 – High Humidity Alarm
When high humidity alarm is triggered.
172 – Low Humidity Alarm
When low humidity alarm is triggered.
301 – AC Failure/ AC Power Restore
When the AC power fails for more than 10 sec.
Restore from AC power failure.
302 – Low battery/ Battery Normal
When the battery voltage of the Panel is low.
When the panel battery restores voltage.
311 – Battery Disconnection/ Battery Reconnected
344 – Interference/ Interference problem solved
358 – Network Cable Unplugged
When the Ethernet cable is disconnected.
374 – Force Arm
When the system is armed with existing fault events
693 – Cross Zone Trouble
When Cross Zone Timer expires without alarm verification.
380 – Device AC Failure
When an AC power device loses AC power connection.
383 – Sensor Tamper/ Sensor Tamper Restore
When any sensor’s tamper protection is triggered.
When the sensor’s tamper function is restored.
384 – Sensor Low battery/ Sensor Battery Normal
When a device detects low battery voltage.
When a device’s low battery condition is restored.
400 – Arm/Disarm (by Remote Controller)
When the system is armed or disarmed by using the Remote Controller.
86