Control Panel is put into Full Arm Mode.
Home arm confirm beep:
set the volume of the confirm beep sound of the Siren when
Control Panel is put into Home Arm Mode.
Disarm confirm beep:
set the volume of the confirm beep sound of the Siren when
Control Panel is put into Disarm Mode.
Exit beeps of full arm:
set exit countdown beep volume under Full Arm Mode.
Exit beeps of home arm:
set exit countdown beep volume under Home Arm Mode.
Entry beeps of full arm:
set entry countdown beep volume under Full Arm Mode.
Entry beeps of home arm:
set entry countdown beep volume under Home Arm Mode.
Door Chime:
set the volume of the Door Chime sound (Ding-Dong Sound).
Voice:
(The following functions are only available for SRV devices):
Doorbell:
set the volume of the ring tone when pressing the button on the Video Door
Phone (VDP).
Fault beep:
set the volume of the voice played when system is force armed under fault
conditions.
Pre-alarm (outdoor IR warning beeps):
set the volume of the voice played when an
outdoor burglar sensor(Door Contact, IR) is triggered.
Behavior
(The following functions are only available for RF modules):
Burglar trigger in home arm:
Enable or Disable whether Siren is activated when an
alarm is triggered under Home Arm.
Burglar trigger in full arm:
Enable or Disable whether Siren is activated when an alarm is
triggered under Full Arm.
Strobe activation:
Enable or Disable Siren LED strobe activation.
Confirm flash:
Enable or Disable Siren LED flash when system Armed/Disarmed.
Exit flash:
Enable or Disable Siren LED flash during an exit countdown period.
Entry flash:
Enable or Disable Siren LED flash during an entry countdown period.
Trigger flash:
Enable or Disable the flashing from the Siren LED when alarming.
Alarm-in-memory sound:
Enable or Disable Alarm in Memory sound.
Fault sound:
Enable or Disable system fault sounds.
34