6.2. Panel Settings
Program the
Panel, Time
and
Sound Settings
at your discretion.
Panel Setting
AC Fail Report
:
When an AC power failure is detected, your Control Panel will report
to the Central Monitoring Station according to the duration set under AC Fail Report. If
5 minutes is set, the event will be automatically reported to the CMS after 5 minutes.
Your Control Panel will start to use its battery power instead of the mains power until
the fault even is cleared.
AC Fail Suspend
: After an AC power failure event is reported, the Control Panel will
convert to sleep mode to conserve battery power. During this period, both GSM and
Ethernet port will be powered off, while the RF and ZigBee modules will keep
working. If 5 seconds is set, both GSM and Ethernet port will be powered off after 5
seconds. In order to send messages to the CMS, the Control Panel will power on its
GSM and Ethernet temporarily.
39