Climax H&S BOILER GUN BG22, Руководство по эксплуатации, Страница: 82 / 94

Product Name:
Nook Industries PAG-1 Grease
(Part number NLU-1001)
Revision Date:
23 Sept 2013
Page 3 of 8
SECTION 6 ACCIDENTAL RELEASE MEASURES
Personal Precautions:
This material may burn, but will not ignite readily. Keep all sources of ignition
away from spill/release. Stay upwind and away from spill/release. Avoid direct contact with material. For
larges spillages, notify persons down wind of the spill/release, isolate immediate hazard area and keep
unauthorized personnel out. Wear appropriate protective equipment, including respiratory protection,
as conditions warrant (see Section 8). See Sections 2 and 7 for additional information on hazards and
precautionary measures.
Environmental Precautions:
If spill/release in excess of EPA reportable quantity (see Section 15) is
made into the environment, immediately notify the National Response Center (phone number 800-424-
8802). Stop spill/release if it can be done safely. Prevent spilled material from entering sewers, storm
drains, other unauthorized drainage systems, and natural waterways. Use water sparingly to minimize
environmental contamination and reduce disposal requirements. If spill occurs on water notify appropriate
authorities and advise shipping of any hazard. Spills into or upon navigable waters, the contiguous zone,
or adjoining shorelines that cause a sheen or discoloration on the surface of the water, may require
notification of the National Response Center (phone number 800-424-8802).
Methods for Containment and Clean-Up:
Notify relevant authorities in accordance with all applicable
regulations. Immediate cleanup of any spill is recommended. Dike far ahead of spill for later recovery or
disposal. Absorb spill with inert material such as sand or vermiculite, and place in suitable container for
disposal. If spilled on water remove with appropriate methods (e.g. skimming, booms or absorbents). In
case of soil contamination, remove contaminated soil for remediation or disposal, in accordance with local
regulations.
SECTION 7 HANDLING AND STORAGE
Precautions for safe handling: Keep away from flames and hot surfaces. Wear eye/face protection.
Wash thoroughly after handling.
Use good personal hygiene practices and wear appropriate personal protective equipment.
High pressure injection of hydrocarbon fuels, hydraulic oils or greases under the skin may have serious
consequences even though no symptoms or injury may be apparent. This can happen accidentally when
using high pressure equipment such as high pressure grease guns, fuel injection apparatus or from
pinhole leaks in tubing of high pressure hydraulic oil equipment.
Do not enter confined spaces such as tanks or pits without following proper entry procedures such as
ASTM D-4276 and 29CFR 1910.146. Do not wear contaminated clothing or shoes.
Conditions for safe storage: Keep container(s) tightly closed and properly labeled. Use and store this
material in cool, dry, well-ventilated area away from heat and all sources of ignition. Store only in approved
containers. Keep away from any incompatible material (see Section 10). Protect container(s) against
physical damage.
“Empty” containers retain residue and may be dangerous. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose such containers to heat, flame, sparks, or other sources of ignition. They may
explode and cause injury or death. “Empty” drums should be completely drained, properly bunged, and
promptly shipped to the supplier or a drum reconditioner. All containers should be disposed of in an
environmentally safe manner and in accordance with governmental regulations. Before working on or in
tanks which contain or have contained this material, refer to OSHA regulations, ANSI Z49.1, and other
references pertaining to cleaning, repairing, welding, or other contemplated operations.
Page 70