Climax H&S BOILER GUN BG22, Руководство по эксплуатации, Страница: 65 / 94

Skin protection
Hand protection
Chemical resistant gloves are recommended.
Other
Wear suitable protective clothing.
Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment.
Thermal hazards
Not applicable.
General hygiene
considerations
When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such
as washing after handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Gas.
Form
Aerosol.
Color
Brown
Odor
Slight petroleum odor, Cherry
Odor threshold
Not established
pH
Not applicable
Melting point/freezing point
< -58 °F (< -50 °C)
Initial boiling point and boiling
range
383 °F (195 °C) @ 101 kPa
Flash point
174.2 °F (79.0 °C) Tag Closed Cup (dispensed liquid)
Evaporation rate
< 0.1 BuAc
Flammability (solid, gas)
Flammable gas.
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
0.6 %
Flammability limit - upper
(%)
7 %
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
< 0.05 mm Hg @ 20ºC (dispensed liquid)
Vapor density
4.7 (air = 1)
Relative density
Not available.
Solubility(ies)
Solubility (water)
< 3 %
Partition coefficient
(n-octanol/water)
< 1
Auto-ignition temperature
> 442.4 °F (> 228 °C)
Decomposition temperature
Not established
Viscosity
< 7 cSt
Viscosity temperature
77 °F (25 °C)
Other information
Heat of combustion
> 30 kJ/g
Percent volatile
92 - 95 %
Specific gravity
0.82 - 0.86 @ 20°C
10. Stability and reactivity
Reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability
Material is stable under normal conditions.
Possibility of hazardous
reactions
Hazardous polymerization does not occur.
Conditions to avoid
Avoid heat, sparks, open flames and other ignition sources. Avoid temperatures exceeding the
flash point. Contact with incompatible materials.
4 / 9
Material name: LPS® 2 (Aerosol)
729 Version #: 01 Issue date: 09-22-2014
SDS US
P/N 100242, Rev. 1 Page 53