Climax H&S BOILER GUN BG22, Руководство по эксплуатации, Страница: 81 / 94

Product Name:
Nook Industries PAG-1 Grease
(Part number NLU-1001)
Revision Date:
23 Sept 2013
Page 2 of 8
SECTION 4 FIRST AID MEASURES
Eye Contact:
For direct contact, remove contact lenses if present and easy to do. Immediately hold
eyelids apart and flush the affected eye(s) with clean water for at least 15 minutes. Seek immediate
medical attention.
Skin Contact: Remove contaminated shoes and clothing and cleanse affected area(s) thoroughly by
washing with mild soap and water or a waterless hand cleaner. If irritation or redness develops and
persists, seek medical attention. If product is injected into or under the skin, or into any part of the body,
regardless of the appearance of the wound or its size, the individual should be evaluated immediately by
a physician. (see Note to Physician)
Inhalation (Breathing): If respiratory symptoms develop, move victim away from source of exposure and
into fresh air in a position comfortable for breathing. If symptoms persist, seek medical attention.
Ingestion (Swallowing): First aid is not normally required; however, if swallowed and symptoms develop,
seek medical attention.
Notes to Physician: High-pressure hydrocarbon injection injuries may produce substantial necrosis of
underlying tissue despite an innocuous appearing external wound. These injuries often require extensive
emergency surgical debridement and all injuries should be evaluated by a specialist in order to assess the
extent of injury. Early surgical treatment within the first few hours may significantly reduce the ultimate
extent of injury.
SECTION 5
FIRE-FIGHTING MEASURES
NFPA 704 Hazard Class
Health:
1
Flammability: 1
Instability: 0
(0-Minimal, 1-Slight, 2-Moderate, 3-Serious, 4-Severe)
Unusual Fire & Explosion Hazards:
This material may burn, but will not ignite readily. If container is not
properly cooled, it can rupture in the heat of a fire.
Extinguishing Media: Dry chemical, carbon dioxide, foam, or water spray is recommended. Water or
foam may cause frothing of materials heated above 212°F / 100°C. Carbon dioxide can displace oxygen.
Use caution when applying carbon dioxide in confined spaces. Simultaneous use of foam and water on
the same surface is to be avoided as water destroys the foam.
Fire Fighting Instructions: For fires beyond the initial stage, emergency responders in the immediate
hazard area should wear protective clothing. When the potential chemical hazard is unknown, in
enclosed or confined spaces, a self contained breathing apparatus should be worn. In addition, wear
other appropriate protective equipment as conditions warrant (see Section 8).
Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done
safely. Move undamaged containers from immediate hazard area if it can be done safely. Water spray
may be useful in minimizing or dispersing vapors and to protect personnel. Cool equipment exposed
to fire with water, if it can be done safely. Avoid spreading burning liquid with water used for cooling
purposes.
Hazardous Combustion Products:
Combustion may yield smoke, carbon monoxide, and other products
of incomplete combustion.
Oxides of sulfur, nitrogen or phosphorus may also be formed.
See Section 9 for Flammable Properties including Flash Point and Flammable (Explosive) Limits
P/N 100242, Rev. 1 Page 69