Climax FF5300, Руководство по эксплуатации

Страница: 65 / 86

P/N 91025, Rev. 4 Page 53
6 STORAGE AND SHIPPING
IN THIS CHAPTER:
6.1 S
TORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -53
6.1.1 S
HORT
-
TERM STORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -53
6.1.2 L
ONG
-
TERM STORAGE
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -53
6.2 S
HIPPING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -54
6.3 D
ECOMMISSIONING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -54
6.1 S
TORAGE
Proper storage of the flange facer will extend its usefulness and prevent undue
damage.
Before storing, do the following:
1. Clean the machine with solvent to remove grease, metal chips, and mois-
ture.
2. Drain all liquids from the pneumatic conditioning unit.
Store the flange facer in its original shipping container. Keep all packing materials
for repackaging the machine.
6.1.1 Short-term storage
Do the following for short-term storage (three months or less):
1. Retract the tool head from the workpiece.
2. Remove the tooling.
3. Remove hoses.
4. Remove the machine from the workpiece.
5. Clean the machine to remove dirt, grease, metal chips, and moisture.
6. Spray all unpainted surfaces with LPS-2 to prevent corrosion.
7. Store the flange facer in its original shipping box.
6.1.2 Long-term storage
Do the following for long-term storage (longer than three months):
1. Follow the short-term storage instructions, but use LPS-3 instead of LPS-2.
2. Add a desiccant pouch to the shipping container. Replace according to
manufacturer instructions.
3. Store the shipping container in an environment out of direct sunlight with
temperature < 70ºF (21ºC) and humidity < 50%.