26
d) Insufficient water level protection
1. When the appliance is switched on, it detects the water level (the atomizing function does not start),
if the water level is insufficient for 6 seconds, the appliance switches to insufficient water level
protection mode:
A beep sounds 10 times (0.5 S Beep, 0.5 S Stop);
All components are switched off (Fan, heating, atomizer)
All alarm indicators flash
The moisture display turns off
2. When in use, if there is no more water in the tank for 6 seconds, the unit switches to insufficient
water level protection mode.
3. If the low water protection mode is activated, you can only press "On / Off" to turn off the unit. The
other keys are deactivated.
4. During the low water protection mode, if you fill the tank, the unit automatically detects the water
level in 6 seconds and then restarts.
e) Electrical memory
In order to facilitate everyday use, the device is equipped with an electric memory:
1. Switch off the device without disconnecting the plug, it can store the last setting except for the timer.
2. In standby mode, the device will resume in the same mode after restarting.
3. Once the cable is disconnected, all data will be erased.
f) Not using the device
1. Turn off the humidifier and make sure it no longer works.
2. Disconnect the cable from the wall outlet.
3. Remove the water tank and open the lid to drain water. Then clean it.
4. Dry the elements and store.
Technical data
Product
Ultrasonic air humidifier
Model
HUM50
Voltage
220-240V
Frequency (Hz)
50Hz
Power (W)
75W
Noise (dB)
≤ 40
Maximum air speed (m/s)
≥2.0
Maximum water capacity (L)
4.0L
Steam volume (ml/h)
450 (+/- 20%)
Net weight (kg)
3.0
Gross weight (kg)
4.0
Product dimensions (mm)
248 x 141 x 250 mm
Содержание HUM50
Страница 2: ...2 ...
