Climadiff HUM50, Инструкции по применению

Страница: 24 / 28

24
3. Select "C / W" to select hot or cold steam
a) Cold steam (default):

Heating off

Starting the atomization function; Ignition of the blue vaporization indicator; Hot or cold indicator lit in
blue means cold humidity
b) Hot steam:

Starting the heating

Starting the atomization function; Ignition of the blue vaporization indicator; Hot or cold indicator lit in
red means hot humidity
4. Press the " S " button to toggle between humidity and timer mode. When you switch to the desired
function, the corresponding indicator will blink. Using the "+" and "-" keys, you can then set the humidity
level and the time you want.
More details:
a) The humidity function (automatic control)
1. Press the
“
S
”
key which will cause the nixie tube and moisture unit (LED_%) to flash. Use the "+"
and "-" keys to set the humidity level. The range is 30 to 70%.
2. Use the "+" and "-" keys to change the humidity level, the function will be effective immediately.
3. If there is no activity for 5 seconds or if you press any other button than " S " \ "+" \ "-" for 5 seconds,
you will exit from the moisture setting mode and Lights will not blink.
4. When the desired humidity level is reached, the appliance automatically stops the atomizing,
ventilation and heating operation. Then it will restart when the surrounding humidity drops by 5%.
5. When the humidity is 70, if you press "+", the Nixie tube will display the following image:
CO means "continuous". When CO is displayed, it means that humidity continues to increase
regardless of the surrounding moisture content. The "+" and "-" keys are active.
6. When the atomizer stops, the spray indicator goes off and the hot and cold indicators go off, but the
other functions remain active.