Climadiff HUM50, Инструкции по применению

Страница: 23 / 28

23

Insert the reservoir into the bracket of the appliance and make sure it is properly seated. If you can
see bubbles in the water tank, this means the location is good. Then if there are no more bubbles, it
means that the tank is quite depressed (picture 15)

Reposition the tip (picture 16)
6. OPERATION
1. Connect the plug, the appliance is in standby mode, the buttons are inactive except the power button.
2. Press the on / off button, the appliance comes on, first it automatically detects the water level, if it is
sufficient, 2 seconds later, the appliance will start with the dehumidification indicator on.
Default start:
a) Semi-vapor
b) Timer function
c) Fan running
d) Fresh steam
e) Controlled humidity 70%
f) Nixie tube is displayed
Lack of water
Hot or cold
Hot or cold
Hours
Up
Down
Humidity level
Nixie tube
Settings
On / Off
Vaporization
Low
Medium
High