ClimaCool UCH 30 Скачать руководство пользователя страница 44

Страница: 44 / 72

www.climacoolcorp.com

Automatic CS Series Strainer Package

Field installed,

high quality, low maintenance stainless steel

filtration systems with 60 or 80 mesh stainless steel screens

will reduce operating costs and prevent nuisance condenser
issues. Strainer package can be equipped with optional

pressure differential alarm and automatic time flush.

Heat Pump

Factory installed reverse cycle heating and cooling operation
compatible with boiler/tower or geothermal systems .

Heat Recovery

Factory installed option providing hot water, as high as
140°F, while simultaneously producing chilled water for the
chiller system .

Hot Gas Bypass

Factory installed on both circuits allowing unit operation
below the minimum step of unloading .

Manual Strainers

Field installed strainers

utilize Y-style and Basket strainers

of cast iron 200 psi or carbon 275 psi with 60 mesh stainless

steel screens to increase efficiency and ensure long
equipment life. All strainers are field installed external to the

chiller bank for ease of service.

Motorized or Manual Water Isolation Valves

and Flush Ports

Factory installed water isolation valves and flush ports

shall provide isolation to the module for maintenance and
cleaning of evaporator and condenser heat exchangers
while adjacent modules continue normal operation . Both

motorized and manual valves include standard ¾” fill and
flush valves.

Note: All Heat Pump configurations require

motorized valves.

Motorized condenser water valves provide head pressure
regulation for low entering condenser water temperature

applications (less than 60°F).

Available choices include:
• One each motorized valve for evaporator and

condenser with one each manual valves for the
evaporator and condenser .

• One each motorized valve for the evaporator and one

each manual valve for the evaporator and two each
manual valves for the condenser .

• Two each manual valves for the evaporator and

the condenser .

Pressure Differential Flow Sensor

Field installed to prevent operation of chiller without

sufficient water flow to the evaporator and/or condenser.

Seismic Certification

Factory installed seismic tested in accordance with OSHPD
standars for cooling only chillers .

Water Header Bypass

Field installed water header bypass may be utilized to
prevent deadheading the pump. A bypass is mandatory with
all motorized valve applications.

Options available for following:
Direct Return:

• Motorized evaporator/condenser water

isolation valves

• Motorized evaporator/manual condenser water

isolation valves

Reverse Return:

• Motorized evaporator/condenser water

isolation valves

• Motorized evaporator/manual condenser water

isolation valves

Options and Accessories

Содержание UCH 30









































































Результаты поиска

Содержание UCH 30

Отзывы:

Бренды по названию

Популярные бренды

ClimaCool UCH 30, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание UCH 30

Отзывы:

Бренды по названию

Популярные бренды