Clifford Wireless Immobilizer XL 500, Руководство пользователя

Страница: 7 / 8

User-selectable features
Your XL500 vehicle security system allows you to set many of its features to your own
personal preferences. We have made the programming procedures very simple: to make
a change, you just flick the valet switch a few times. The system comes from the factory
with all of its features pre-programmed as noted in the table below. To change any of the
settings, use the procedure noted. To restore the feature to its factory setting, just repeat
the procedure:
1. Select the feature you wish to program from the table below and on the following
page. Note the number of flicks and chirps associated with that feature.
2. Turn your vehicle’s ignition switch to its “ON” position.
3. Immediately flick the valet switch back and forth, counting the number of chirps
you hear. Stop when you reach the number associated with the feature you selected.
4. If noted, perform the “secondary action.”
5. After a 3-second pause, you will hear 1 chirp to confirm that you have changed
the setting of the feature. Turn the ignition off.
6. Repeat steps 1-5 for any other features you wish to program.
Programming table for user-selectable features
Feature
Factory
setting
# of flicks
and
chirps
Secondary
action
Program
completion
confirmation
Result
AutoArming
ON
4
—
1 chirp 3
seconds after
last step
Change state from
ON to OFF or vice-versa
AutoArm
& Lock
OFF
5
—
1 chirp 3
seconds after
last step
Change state from
ON to OFF or vice-versa
FACT —
False Alarm
Control and
Test
ON
12
—
1 chirp 3
seconds after
last tap
Change state from
OFF to ON or vice-versa
Add a New
Remote to
Channel 1
(arm/disarm)
—
13
Press remote control button I
1 chirp
Button I/channel 1 code
of the new remote control
has been memorized
Add a New
Remote to
Channel 2
(remote
accessory)
—
14
Press remote control button II 2 chirps
Button II/channel 2 code
of the new remote control
has been memorized
Add a New
Remote to
Channel 3
(silent
arm/disarm)
—
15
Simultaneously press
remote control buttons I+II
3 chirps
Buttons I+II/channel 3 code
of the new remote control
has been memorized
6