Adding new remote controls
Your XL500 will respond to as many as two Clifford 3-channel remote controls.
You can buy additional remote controls from any Authorized Clifford Dealer (or
call our 24-hour Customer Service Department at 800-824-3208) and program them
into the system yourself. To add a new remote control to the system, use the
procedures noted in the User-selectable features section on page 6.
How to erase the codes of lost or stolen remote controls
If one of your remote controls is ever lost or stolen, you can push its digital codes
out of system memory to make sure that the missing remote control can never be
used to disarm your system. Just use the Adding new remote controls procedures
noted in the User-selectable features section on page 6 for a total of two times (if
you have only one remote control, program it twice).
© Copyright Clifford Electronics, Inc., 1993 31-077B/XL5OM/1093
Example
To change the AutoArming feature from its factory setting of on to off, you
would do the following:
Turn the ignition key to the ON position.
Immediately flick the valet switch 4 times (you a chirp each time you
flick the switch for a total of four chirps).
Wait 3 seconds. The system will sound one more chirp to confirm that
the AutoArming setting has been changed.
Turn the ignition off (you’ll hear 3 chirps to confirm exit of program
mode).
That’s all there is to it!
