background image

Standard Features of the XL500 

Lifetime Warranty— For as long as you own the vehicle (see warranty card for details).

FACT™ — False Alarm Control and

 

Test — Eliminates recurring false alarms.

A Pair of 2-Button/3-Channel Remote Controls — Fingertip control from 100’ away.

Patented Remote Control Code Learning and MultiRemote™ Recognition — Add or
delete, with just a few flicks of a switch, up to 2 different Clifford remote controls.

Multiple-Car Control — Allows you to command, with the same remote control, a
Clifford vehicle security system on your second vehicle.

AntiScan™ — Blocks electronic scanners from disarming the alarm.

Remote Controlled Chirp Muting — Lets you arm or disarm silently anytime you
wish (the parking lights provide visual confirmation).

Remote Door Lock/Unlock Outputs — Automatically locks/unlocks your vehicle’s
doors when you remotely arm/disarm your XL500 (some vehicles require optional
relays).

Parking Light Flasher Output— Visually confirms alarm status from a distance (most
vehicles require an optional relay).

Patented AutoTesting™ — Automatically tests for any trigger/sensor malfunction.

Malfunction AutoBypass™ — Bypasses any malfunction and arms all other points.

Patented Prior Intrusion Attempt Alert — Identifies whether a trigger or a sensor was
activated during an attempted intrusion while you where away.

Advanced CMOS Microprocessor — Commands and monitors system functions
more than 10,000 times per second, yet draws less power than your car’s clock.

Full-Time Remote Panic — For your safety, you can remotely activate the siren and
flashing parking lights from inside or outside the vehicle, even while driving.

High-Output Siren — Very loud alarm sound with automatic noise abatement to
ensure against excessive battery drain or towing of the vehicle due to noise
pollution.

Smart AutoArming™ — Arms itself “passively” if you forget.

AutoArming Enable/Disable — Enable or disable AutoArming any time.

User-Selectable AutoArm & Lock — Select whether the doors lock upon AutoArming.

Fault-Proof Starter Interrupt Output— With the addition of an optional relay,
prevents an intruder from starting the engine.

Magnetic Resonance Sensor™ — Detects intrusion-related vibrations and impacts.

High-Luminescence LED Status Indicator — Adds visual deterrence and provides
alarm status confirmation.

Hood/Trunk Trigger Input — For full perimeter protection of the engine
compartment and trunk contents (may require optional pin switches and wiring).

User-Friendly Programming — A few flicks of a switch is all it takes.

Secured Valet Mode — Permits vehicle servicing and valet parking without
relinquishing your remote control.

1

Содержание Wireless Immobilizer XL 500









Отзывы: