© 2004 Directed Electronics, Inc. Vista, CA
2
25
5
pplluugg--iinn LLEEDD aanndd vvaalleett//pprrooggrraam
m sswwiittcchh
These plug into the module. The status LED plugs into the small two-pin socket, while the Valet®/Program switch
should be plugged into the larger blue two-pin connector. The status LED fits in a
9
/
32
-inch hole.
N
NO
OTTEE:: Never use a BLUE LED in combination with a RED LED.
SSttaattu
uss LLEED
D
V
Vaalleett®
®//P
Prro
og
grraam
m SSw
wiittcch
h
pprrooggrraam
mm
meerr iinntteerrffaaccee,, 33--ppiinn ppoorrtt
The black 3-pin port is provided for programming of the unit. The unit can also be programmed using the
Bitwriter. When using the Bitwriter, it is possible to configure any and all of the programmable functions as well
as lock the Transmitter/Receiver and System Features Learn Routines so that unauthorized users cannot change
the configuration or program transmitters to the unit.
When the learn routines have previously been programmed using the Bitwriter, they may have been locked.
Before proceeding with reprogramming the learn routines, they must be unlocked with the Bitwriter - this
cannot be done manually with the Valet switch.
DIA-41
