© 2004 Directed Electronics, Inc. Vista, CA
3
35
5
2
2--9
9 2
2n
nd
d IIGGNNIITTIIOONN//AACCCCEESSSSOORRYY OOUUTTPPUUTT:: This will allow the PINK/WHITE to be used as a 2nd ignition or an accessory.
2
2--1
10
0 A
ACCCCEESSSSO
OR
RY
Y SSTTA
ATTEE D
DU
UR
RIIN
NG
G W
WA
AIITT--TTO
O--SSTTA
AR
RTT:: This will allow the programming of the accessory wire during the
wait-to-start period of a diesel motor. When ON the accessory comes on when the wait-to-start output is acti-
vated and stays on, dropping out during crank and returning once the car has started. When OFF the accessory
will activate as a normal accessory.
2
2--1
11
1 2
2n
nd
d SSTTAATTUUSS OOUUTTPPUUTT:: This status will activate 10 seconds after the car has started. It is intended to operate
the defogger circuit. The output can be programmed to a latched or a pulsed output. When programmed to the
latched output the status will only stay active for 10 minutes.
2
2--1
12
2 A
AN
NTTII--G
GR
RIIN
ND
D O
ON
N//O
OFFFF:: With the anti-grind On (default) the ground-when-armed output will be active during
remote start operation. If accessories such as a voice module or window module are added to the unit, it may be
necessary to program this feature off.
ttaacchh lleeaarrnniinngg
To learn the tach signal:
1.
Start the vehicle with the key.
2.
Within 5 seconds, press and H
HO
OLLD
D the Valet/Program switch.
3.
The LED will light constant when the tach signal is learned.
4.
Release the Program switch.
DRW-96
