Click RF PiLOT, Руководство по установке

Страница: 8 / 25

13 12
T1 T1
T2
T1
T2
T1
T2
T2 T2
Controller Activation
When not being used to control actuators the display goes in to sleep mode - no
information is displayed (Fig.1).
Press any button briefly to display the Quick Control Screen (Fig.2).
Note: 10 seconds after pressing any button the RF Pilot goes in to sleep mode. When in the Programming Menu, the RF
Pilot remains with the screen shown until exited.
Controller Activation
Programming - Initial Setup
T1 T1
Fig. 4 Fig. 2
tu 01.03.11 12:54
Rooms
Scenes
Favourite
EXIT SELECT
tu 01.03.11 12:54
Favourite 1
Favourite 2
Favourite 3
Favourite 4
Favourite 5
Favourite 6
Favourite 7
Temp.: 23C MENU
Fig. 1
To enter the Programming menu (Fig.6) press the left side of the
direction dial together with the T1 button (Fig.5) whilst in the
Control Menu.
The programming menu can only be accessed from the control
menu with pressing the left side of the dial and T1 together.
Programming Menu
Language setting. With language highlighted white press T1
(Fig. 7) to enter the Language menu. Choose the required
language using up & down on the direction dial (Fig.8).
Confirm using the T1 button.
Language
tu 01.03.11 12:54
Rooms
Scenes
Favourite
EXIT SELECT
Fig. 5
Language
Date and time
Actuators
Rooms
Scenes
Favourite
Device reset
EXIT SELECT
Fig. 6
Cestina
Slovencina
English
Deutsch
Magyar
Pyccии яз.
Romana
Polski
EXIT SELECT
Fig. 8
Language
Date and time
Actuators
Rooms
Scenes
Favourite
Device reset
EXIT SELECT
Fig. 7
T1
T2
Fig. 3
tu 01.03.11 12:54
Favourite 1
Favourite 2
Favourite 3
Favourite 4
Favourite 5
Favourite 6
Favourite 7
Temp.: 23C MENU
From the Quick Control screen to enter the Control menu press T1 (MENU) (Fig.3).
Control Menu
Controller Activation
Initial Setup - Language
Programming