Click RF PiLOT, Руководство по установке

Страница: 21 / 25

39 38
Warning is displayed in case of incorrect entry.
RF Touch Unit Warnings
Warning Troubleshooting
Rooms / Scenes / Favourite 10 programmes can be defined to each section
Memory full! (when adding actuators) No more than 40 actuators can be added to the device
The actuator has already been used. The device is already assigned to a room
Low battery indicator on Battery level must be sufficient to ensure reliable communication with
actuators, change batteries
Communication error! The actuator has not accepted the command, please repeat
[ - orange symbol - error (when controlling scenes)
An actuator or some of the actuators have not confirmed executing the
command, please repeat the command
× - red symbol - error
The actuator(s) has/have not confirmed executing the command, please
repeat the command
If the error persists:
- The actuator has accepted and executed the command, RF Pilot has not
detected any execution feedback signal
- If some of the actuators have accepted and executed the command
(when controlling Scenes) but some have not
Low battery
The controller is too far from the actuator(s)
Check the commands defined in the scene
What to do when ...
T1
T2
T1
T2
T1
T2
T1
T2
Reset - Resetting the device is used to delete all settings (Fig.1-2). The version of the firmware is
displayed, the memory is Formatted and the factory settings are restored (Fig.3-4).
Device Reset
Language
Date and time
Actuators
Rooms
Scenes
Favourite
Device reset
EXIT SELECT
Fig. 1
tu 01.03.11 12:54
Really reset?
No
Yes
EXIT SELECT
Fig. 2
RF Pilot
Firmware v10.0
Fig. 3
Formatting
memory...
Fig. 4
Programming - Device Reset
On Screen Warnings
Device Reset