Click RF PiLOT, Руководство по установке

Страница: 16 / 25

29 28
Programming - Scenes
Commands - (Fig.1). (Switching actuator)
Assign each command (Fig.2 - 1/10, 2/10, 3/10 etc.) by firstly selecting the room (Fig.3) and then the
the defined actuator (Fig.4).
The actuators function can be selected (Fig.5 - showing switching functions).
All the the functions created as a command will be executed when the scene is activated.
Note.: Up to 10 actuators with commands can be allocated to each scene.
T1
T2
tu 01.03.11 12:54
Name:
Reading
Rename
Commands
Reset
BACK PROCEED
Fig. 1
T1
T2
tu 01.03.11 12:54
Turn On
Turn Off
Button
Delay On
Delay Off
EXIT SELECT
Fig. 5
T1
T2
tu 01.03.11 12:54
Centre Light
Wall Lights
EXIT SELECT
Fig. 4
T1
T2
tu 01.03.11 12:54
Lounge
Dining Room
Kitchen
Garden
Room 5
Room 6
Room 7
EXIT SELECT
Fig. 3
Programming - Scenes
Scenes - Commands Scenes - Commands (continued)
T1
T2
Command:
1/10
Room:
Unassigned
Actuator:
Unassigned
Action:
Unassigned
BACK ASSIGN
Fig. 2
T1
T2
tu 01.03.11 12:54
Turn On
Turn Off
Brightness: 50%
Slowly ON
Slowly OFF
Setting
BACK SELECT
Fig. 9
T1
T2
tu 01.03.11 12:54
Centre Light
Wall Lights
EXIT SELECT
Fig. 8
T1
T2
tu 01.03.11 12:54
Lounge
Dining Room
Kitchen
Garden
Room 5
Room 6
Room 7
EXIT SELECT
Fig. 7
T1
T2
Command:
2/10
Room:
Unassigned
Actuator:
Unassigned
Action:
Unassigned
BACK ASSIGN
Fig. 6
Commands (Dimming actuator)
After each actuator and function has been added to a command, the screen will move to the next
command (2/10 etc.) automatically (Fig.6).
Repeat selecting the room (Fig.7) and actuator (Fig.8). For dimming actuators, the desired lighting
level can be selected by using left & right on the dial to increase or decrease the brightness %.
Note.: Up to 10 actuators with commands can be allocated to each scene.