Cleveland WELBILT MFS, Руководство пользователя, Страница: 9 / 29

8
DISASSEMBLY
Note: Remove "O" rings using a wooden
or plastic picker; DO NOT use a
sharp object.
Prepare a properly deluted solution of
authorized claning solution in a plastic soak bucket to
receive small parts, gaskets and “O” rings.
1. Move slide valve on kettle's air
quick connect to down position to stop
air supply to metering filling station.
Push yellow tab down to
release air pressure before
disconnecting air hose
CLEANING INSTRUCTIONS
Product Cylinder Piston Head Assembly
3" dia.
Food
Hose
Discharge Valve
Plunger
Discharge Valve Body
Discharge
Head
Assembly
Short
2" dia.
Pipe
Push
Pin
Air Cylinder
2" dia. Elbow
Long
2" dia.
Pipe
Product
Discharge
Nozzle
Actuator
Assembly
2" Sani
Clamp
2" Sani
Clamp
O-rings
Product Piston
Product Piston "O" Ring
Gasket
Gasket
Gasket
Gasket
Flapper Valve
"O" Ring
Spring Large Lug Nut
Flapper
Rotary Actuator
Cylinder Seal
Shaft
Piston Head
Air Line
Air Line
0
0
!
WARNINGS:
Disconnect Air supply to Metering Filling Station.
Discharge air pressure from the unit.
Do not submerge Discharge valve or Rotary
Actuator in water.
Never use steel wool for cleaning; damage to inner
surface will result.
Use warm water and mild detergent solution.
Do not use Chloride cleaners; they may damage
stainless steel.
For difficult cleaning applications use alcohol,
baking soda, vinegar or a solution of ammonia in
water.