Cleveland MKEL-100-T, Руководство оператора

Страница: 38 / 43

50
0
100
150
200 250
300
350
400
40
50
60
0
10
20
30
psi
kPa
VE
N
T
A
I
R
;;
;;
;;
;;
;;
;;
;;
;;
;;;;;;;;;;
;;;;;;;;;;
;;;;;;;;;;
PRESSURE
GAUGE
"O" RING
KNURLED
NUTS
Must be firmly
tightened.
BRACKETS
If Pressure Gauge is prone to damage due to
operating conditions, the following option is
available:
Pressure Gauge Guard (Part Number PGG )
1/4" x 1/2" stainless steel bar bolted over gauge
to prevent damage from impacts. (Can be field
installed.)
50
0
100
150
200 250
300
350
400
40
50
60
0
10
20
30
psi
kPa
VE
N
T
A
IR
Area contacted by "O" Ring must be clean
and free of food, grease and other deposits
prior to installing or replacing "O" Ring.
Cleveland Kettles are designed to withstand adverse operating conditions associated with high
volume cooking facilities. To achieve this, internal components are completely sealed from the
outside environment.
However, if the Pressure Gauge "O" Ring fails or is not replaced with the gauge, damage can
result when water penetrates through this area. This occurs because the bottom cover seal that normally
keeps water out now traps the water in.
Two major reasons for water penetration at the Pressure Gauge are:
A / Gauge is loose so the "O" Ring is not providing a proper seal.
B / Gauge is replaced without the "O" Ring being replaced.
50
0
100
150
200
250
300
350
400
40
50
60
0
10
20
30
psi
kPa
V
EN
T
A
IR
NOTE: Kettle shown
upside down for clarity.
PGG
Part Number
KE50429-2
Part Number
FA05002-21
PRESSURE GAUGE "O" RING REPLACEMENT