Cleveland MKEL-100-T, Руководство оператора

Страница: 10 / 43

NOTE: Do not fill kettle above recommended level
marked on outside of kettle.
NOTE: The Low Water Indicator Light (Red) ( 13 )
should not be lit when kettle is in the upright
position during kettle operation. This light indicates
that the elements have been automatically shut off
by the kettle's safety circuit. It is, however, normal
for the red light to come on when the kettle is in a
tilted position.
6. When cooking is completed place On-Off
Heat Switch (
10 ) to the "OFF' position.
7. Pour the contents of the kettle into an
appropriate container by tilting the kettle
forward. Care should be taken to pour slowly
enough to avoid splashing off the product.
NOTE: As with cleaning food soil from any cookware,
an important part of kettle cleaning is to prevent food
from drying on. For this reason, cleaning should be
completed immediately after cooked foods are
removed. .
The accompanying chart shows approximate times
required for electric kettles of various capacities to
boil water. Temperature control knob must be set at
"10" (Max.) throughout the heatup period. Water
will boil about 1/3 faster if the kettle is filled only to
the outer steam jacket's welded seam, resulting in
a kettle filled to 2/3 capacity.
OFF ON
General Operation
1. Turn MAIN POWER SWITCH
(
1 ) to "ON".
MIX LIFT
OFF
Lifting & Lowering
Bridge
WARNING- Insure FAUCET
SPOUT ( 14 ) is out of way before
raising or lowering bridge.
1. Turn MIX/LIFT SWITCH ( 2 ) to
"LIFT".
2. Turn MIXER SPEED
CONTROL (
4 ) to "MIN" and
back up to #5.
3. Turn and hold UP/DOWN
SWITCH (
3 ) "UP" to raise or
"DOWN" to lower.
UP DOWN
OFF
MIX LIFT
OFF Mixing
1. Turn MIX/LIFT SWITCH ( 2 ) to
"MIX".
2. Turn MIXER SPEED
CONTROL (
4 ) to "MIN" and
slowly adjust to desired
speed.
3. Adjust SECONDARY SPEED
CONTROL (
9 ) to desired
speed.
Tilting Kettle
1. Raise MIXER BRIDGE ( 6 ) and
swing to side.
2. For manual tilt: turn
HANDWHEEL ( 3 ).
3. For power tilt: turn switch
" " to raise, or " " to tilt.
WARNING- Do not tilt kettle
when mixer agitators are in kettle
bowl.
Adding Water
Manually
1. Locate FAUCET SPOUT ( 14 )
over desired kettle.
2. Turn on HOT or COLD WATER
VALVES (
15 or 16 ).
APPROXIMATE FULL KETTLE COOKING TIMES
Times in Minutes
Gals. Ltrs. Standard Wattage High Wattage *
208V 240V 480V 208V 240V 480V
25 95 60 45 60 40 30 30
40 150 60 50 75 40 30 30
60 225 100 75 75 50 40 40
80 300 130 100 100 65 50 50
100 375 160 120 120 80 60 60
* High Wattage is only available with 3 phase units