Cleveland CE-400 Series, Руководство по эксплуатации, Страница: 11 / 17

CE-400 Series Label Shrinking Machines
Page
10
The method of adjusting intelligent temperature meter is below:
A. The upper line of number in red shows the
practical value (PV), and the down line of number
in green shows the set value (SV). B. Press the SET
button, the green light flashes.
C.
Press
▲
to increase or press
▼
to decrease
the temperature.
D.
After setting the temperature, press down
the SET button again. It starts to work when the
green light stops flashing.
Notice: When setting temperature, use a soft touch as the intelligent meter is sensitive.
6.
Turn the down heating adjustment knob of heat shrink tunnel all the way to
the right to Maximize. Once it reaches temperature, adjust the knob according to
practical shrink effect and packing requirement. CE-415 only has one knob of heating
adjustment, without division of upper and down adjustment.
7.
Turn on the fan and conveyor switches. Generally, put speed of conveyor in
the middle position first, and then adjust it while testing.
8.
When it reaches required temperature, we can start testing or working.
9.
While label is in upper position of bottle, turn the down heating adjustment
knob down or off. In the contrary, while label is in the bottom position of bottle, turn
upper heating adjustment knob down or off. In this way, it is able to preserve energy
and minimize the influence of heat to products.