Installation Guide_PV-ezRack_SolarTerraceIII-A_AU_V2.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
01
page
of 28
Introduction
Clenergy PV-ezRack
®
SolarTerrace III-A™ is a
pre-assembled ground mount system suitable
for large scale commercial and utility scale
installations. PV-ezRack
®
SolarTerrace III-A
has been developed to fit any PV module. The
innovative and patented SolarTerrace III-A™
T-Rails simplify and improve the accuracy of
the installation. Using high quality engineered
components SolarTerrace III-A™ saves
developers and installers, time and money
when delivering large scale projects.
Please review this manual thoroughly before
installing your SolarTerraceIII-A™system. This
manual provides
1) Simple introduction of the installation relating
to PV-ezRackSolarTerrace III-A Mounting
systems.
2) Planning and installation instructions for
SolarTerraceIII-A.
SolarTerraceIII-A™parts, when installed in
accordance with this guide, will be
structurally sound and meet the AS/ NZS
1170.2:2011 (R2016) standards. During
installation and especially when working on the
roof, please comply with the appropriate safety
regulations, and please also comply with the
relevant regulations of your local region.
Please check that you are using the current
version of the Installation Manual by contacting
Clenergy Australia by email on sales@
clenergy.com.au, or your local representative.
The installer is solely responsible for:
• Complying with all applicable local or national
building codes, including any that may supersede
this manual;
• Ensuring that PV-ezRack and other products
are appropriate for the particular installation
and the installation environment;
• Using only PV-ezRack parts and installer
supplied parts as specified by PV-ezRack
(substitution of parts may void the warranty
and invalidate the letter of certification on
page 2);
• Recycling: Recycle according to the local
relative statute.
• Removal: Reverse installation process.
• Ensure that there are no less than two
professionals working on panel installation.
• Ensure the installation of all electrical
equipment is performed by licensed
electricians.
• Ensuring safe installation of all electrical
aspects of the PV array. This includes providing
adequate earth bonding of the PV array and
PV- ezRack
®
SolarTerraceIII-A™ components
as required in AS/NZS 5033-2014 AMDT22-
2018.
Introduction
Planning
Tools & Components
System Overview
Installation Instruction
Warranty
01
02
11
12
14
28
List of Contents
1. Introduction
