Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
8
page
of 15
Installation Guide_PostMount 3-A for XL Panels_AU_V1.1 (January 2021)
Installation Instruction
4.4 Rectangular Tube- Landscape Installation
4.4.1 Fix the 3 pcs PM3-A Rectangular Tube- Landscapes at Rectangular Tube-Master with 3 pcs
U-bolts, 6 pcs M10 nuts , 6 pcs spring washers 10, and 6 pcs plain washers 10. Do not fasten the
Nut until 3 Rectangular Tube- Landscapes aligned.
Note: Adjust the Rectangular Tube- Landscapes until the dimension D1=D2, D3=D4.
Recommended torque for M10 bolts is 35~40 N·m.
4.4.2 Preassemble the Cross Connection Clamp at the Rectangular Tube-Master with M8*70 hex
bolts, plain washer 8, spring washer 8, and M8 nut as shown in the figure below.
Note: Do not fasten the M8*70 hex bolt in order to make other clamp fit well.
