Unit 1, 10 Duerdin St, Clayton VIC 3168, Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
15
page
of 15
Installation Guide_PostMount 3-A for XL Panels_AU_V1.1 (January 2021)
@ClenergyClub @ClenergyAUS
Offices: Australia | China | Japan | Germany | Thailand | Philippines
@Clenergy_global
@ClenergyClub
@Clenergy
www.clenergy.com.au
PV-ezRACK
®
10 Year Pr
oduct Warranty
10 Year Product Warranty
• Damage caused by extreme weather conditions or any other natural or man-made event outside of our control.
• Damage caused by attachments not designed or approved for connection to the Product.
• Damage caused by lightning strikes or excessive currents through the earthing/grounding clamps, clips or lugs.
Our Products may come with guarantees that cannot be excluded under the Australian Consumer Law. You may be entitled under statute to a replacement
or refund for a major defect in the Products. You may also be entitled under statute to have the products repaired for any defect which does not amount to
a major defect. The benefits given by this Warranty are in addition to any statutory rights and remedies you may have under Australian law.
Product Care:
Clenergy Products are designed to be durable with minimal care, however it is important that you maintain your mounting Product in accordance with
proper practices. This includes regular maintenance and inspection to avoid damage.
The aluminum components are made from either AL 6005CL-T5 or AL6005-T5 and may also have a clear anodization. The aluminum may undergo some
surface oxidization in service. Please note that this is normal and part of the natural ageing process. The result may even be beneficial to the longevity of
the Product, as the oxidization can provide additional protection against degradation by pollution and atmospheric corrosion.
• The torque values of fastener connections on mounting system must be checked annually and corrected if needed in accordance with Clenergy
Australia’s installation manual.
• Regular cleaning to remove any soil or other possible contaminants must also be performed. Cleaning should be performed in accordance with
guidelines recommended by the Galvanizers Association of Australia (GAA) (for Products supplied in Australia) or the Galvanizers Association of New
Zealand (GANZ) (for Products supplied in New Zealand) or any other similar organisations (as applicable). When using tin interfaces for installation
works, screws not exposed to frequent rain should be washed down with fresh water at least every 6 months.
• You should not use harsh chemicals or highly abrasive materials that may damage Product surfaces. Use only cleaners that are designed for aluminium
and always wash them off with clean water afterwards. Steel components should be inspected before and after installation and any damage to the
galvanizing should be treated immediately to prevent rusting. It is normal for galvanized Products to develop a surface barrier (the ‘patina’), which helps
to protect the surface from contaminants in the atmosphere and does not adversely affect the Product.
• You should also ensure that if the Product is stored prior to installing that it is not contaminated by contact with rusty items or other impurities such as
dirt and chemicals. Should this occur, you must clean the Product and make any repairs using approved methods such as galvanized paint and antirust
treatments immediately before installation.
