成Installation Guide_PV-ezRack_ezShade 2.0_AU_V1.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
07
page
of 19
成Installation Guide_PV-ezRack_ezShade 2.0_AU_V1.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
06
page
of 19
System Overview
⑪
BA-SDII/200, Corrugated T-Base 200
⑫
BA-SDII/280, Corrugated T-Base 280
⑬
GU-SDII/22/1913, Gutter 22*1913
⑭
C-SDII/50/35, Corrugated Clamp
⑮
RR-GU/SDII/22, Rubber ring for Gutter 22
4.2 2 Precautions during Stainless Steel Fastener Installation
Improper operation may lead to deadlock of Bolts and Nuts.
The below steps should be applied to every stainless steel nut and bolt assembly to reduce this risk.
4.2.1 Reduce the friction coefficient:
①
Ensure that the thread surface is clean (no dirt or contaminant)
②
Apply lubricant (grease or 40# engine oil) to fasteners prior tightening to avoid galling or seizing in
the threads;
4.2.2 General installation instructions:
①
Apply force to fasteners in the direction of thread;
②
Apply force uniformly, to maintain required torque;
③
Professional tools and tool belts are recommended, avoid using electric tools for final tightening;
④
Avoid working at high temperatures,
4.2.3 Safe Torques
System Overview
4.3 Installation Dimensions
All drawings and dimensions in this installation guide are for a generic reference. The PV-ezRack
®
ezShade 2.0 is to be optimized to suit specific conditions for each project and documented in a
construction drawing. As a result, major components of the PV-ezRack
®
ezShade 2.0 may be provided
in section sizes and lengths that vary from those shown in this guide. The installation process
detailed in this instruction guide remains the same regardless of the component size. In case you
need to do any on-site modifications or alteration of the system in a way that would be different from
the construction drawing please provide marked up drawings/sketches for Clenergy’s review prior
modification for comment and approval.
Note: Tighten the bolts after adjusting all components in place. Tightening and loosening bolts repeatedly will
lead to deadlock of bolts.
