成Installation Guide_PV-ezRack_ezShade 2.0_AU_V1.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
03
page
of 19
成Installation Guide_PV-ezRack_ezShade 2.0_AU_V1.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
02
page
of 19
2. Planning
According to the figure above, applying PV module 1960x992x35mm, tilt angle 5 degree. The MAX height
from the ground is 2572mm. The specific installation steps are as follows.
Planning
3.1 Installation Tools
3. Tools and Components
Tools & Components
String
Torque Wrench
5m Tape
Allen Key 6mm
(M8 hex
socket
screw)
Electric Drill
(ST6.3 self-
drilling screw
and M8
hex socket
screw)
(M8/M12/M16)
Mark Pen
Rubber hammer
Caulking Gun
Socket Wrench
M8/M12
Note: The tools shown are only for installation of support system (not included in the scope of supply), please
contact the system installer for electronic component installation tools.
