成Installation Guide_PV-ezRack_ezShade 2.0_AU_V1.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
01
page
of 19
Introduction
Clenergy PV-ezRack
®
ezShade 2.0 is a
ground mounting system for PV installation
in residential or commercial regions, and
which is designed to create new spaces
for solar energy while also providing shade
for parking. The use of patented aluminium
base rails, the Z-module technology and the
splicing eliminate on site cutting and enables
particularly fast installation.
Please review this manual thoroughly before
installing ezShade 2.0. This manual provides
the following contents: (1) Installation planning;
(2) Installation instructions.
The PV-ezRack
®
ezShade 2.0 parts, when
installed in accordance with this guide, will be
structurally adequate and meet the GB50009-
2012, JIS8955, EN 1990/1991/1993, ASCE7-
10, ISO 14713 standard. During installation,
and especially when working on the
ground, please comply with the appropriate
occupational health and safety regulations.
Please also pay attention to other relevant
regulations in your local region. Please check
that you are using the latest version of the
installation manual by contacting Clenergy via
email on www.clenergy. com.cn.or contacting
your local distributor.
The installer is solely responsible for:
• Comply with all applicable local or national
building codes that may replace this manual;
• Ensure that ezRack and other products are
appropriate for the particular installation and
installation environment;
• Using only ezRack parts and installer-supplied
parts as specified by ezRack (substitution of
parts may void the warranty and invalidate the
letter of certification);
• During construction, ensure that the foundation
anchor bolts have sufficient strength and shear
force;
• How to recycle: according to local regulations;
• How to disassemble: reverse installation
process;
• Ensure that there are no less than two
professionals working on the panel installation;
• Ensure the installation of the electrical
equipment is performed by a professional and
accredited electrician.
Introduction
Planning
Tools &Components
System Overview
Installation Instruction
01
02
03
05
08
List of Contents
1. Introduction
