Page 14
9.5 Collar
For removing transpiration and dust the collar should be washed daily. Remove the collar from the cape
and wash it in warm water and mild detergent. Dry it in a clothes dryer at the lowest temperature setting.
Do not dry clean. See section 8.5 for removal and installation instructions.
9.6 Sweatband / Suspension
The sweatband, suspension, and chinstrap should be washed using warm water and mild detergent. See
section 8.3 for removing suspension.
9.7 Helmet Assembly
The helmet assembly should be cleaned with disinfectant. You can use the product
“Indicur“ made by
„Henkel“.
WARNING!
This product was only tested for agreeableness with our helmet. When using this product you
have to follow the instructions in the manual. For eventually occurring indigestibility with the skin or other
health damages we do not take any liability.
9.8 Lenses
Inner and outer lenses should be replaced when pitted or scratched. However mild detergent and water
can be used to clean them. Volatile solutions such as alcohol, gasoline or ammonia must be not used to
clean these lenses. Allow the lens to air dry; cloth and towels can scratch the lens surface.
10 Storage
10.1 Daily Storage
When respirator is not in use, it must be stored in a clean, dry area. Hang the respirator by the handle.
10.2 Long Duration Storage
After cleaning and thorough drying, the cape should be tucked inside the helmet (only the nylon, the rubber
and the ASS- cape). The respirator should then be placed in a plastic bag and the bag sealed to keep out
dust and moisture.
11 Spare Parts
11.1 Helmet
Pos.
Part-No.
Model
Description
-
24243 D APOLLO 600 CE
Blast-Hood A-600CE + Air Control valve + Nylon cape
24315D
APOLLO 600 CE
Blast-Hood A-600CE+ Air Control valve + Leather cape
-
24213 D APOLLO 600 CE Blast Hood A-600CE with hose 5m
24244D
APOLLO 600 CE Blast Hood A-600CE without auxiliary equipment
