57
Figure 45
Step 8
Adjust Base to fit snugly against the vehicle seat back:
• Position one hand on each side of the Base.
• Use thumbs to press and hold both LATCH Adjustment
Buttons (1) while pushing the Base firmly towards
vehicle seat back (2), as shown in
Figure 45
.
• Release LATCH Adjustment Buttons and continue to
push the Base toward vehicle seat back until it is in
firm contact with the vehicle seat back and locked in
position.
NOTE:
Once the Base is in firm contact against the
vehicle seat back, you can adjust the Base more snuggly
by pushing each side one at a time and wiggling the
Base back into the vehicle seat back.
Step 9
Check for secure installation:
• While gripping the Base above the LATCH
Connectors, pull Base front to back and left to right to
check for secure installation as shown in
Figure 46
.
LATCH system MUST stay secure and Base should not
move more than 1 in. (2.5 cm) in any direction.
1
2
Figure 46
