53
Step 1
Select a forward-facing vehicle seating location which
has LATCH, as shown in
Figure 39
. Locate the vehicle
LATCH lower anchors as explained in “Vehicle Child
Restraint Anchorage System (LATCH)” on
page 41
in this
manual and in your vehicle owner’s manual.
WARNING
• Only use the Car Seat Base LATCH system in vehicle seating
locations designated by the vehicle manufacturer for use with LATCH
and that have a standard anchor spacing of 11 in. (280 mm).
• If your vehicle has a storage compartment under the floor, install
Base with Load Leg in that seating position only if approved by the
vehicle manufacturer.
• ALWAYS store the Load Leg when not in use.
Installing Car Seat Base with LATCH
Figure 39
