CFH Startup Guide
Part No. 750-293
9
Figure 11 Changing the setpoint
2.2 Initiating Burner Sequence
When ready to start the boiler, navigate to the Operation screen (see “Changing the Setpoint” above).
Turn the <Burner switch> screen button to ON. The burner is now enabled.
Figure 12 Operation screen
2
3
4
To change the steam pressure setpoint: 1. Press the yellow highlighted setpoint display window.
2. Clear the current value.
3. Enter the desired value.
4. Press <OK>.
1
Note:
Some features of the CB Falcon controls are password
protected. Service level password = 9220.
BURNER
SWITCH
button
!
Warning
Before initial startup, check for
blockages in the flue venting or
vent terminations. Inspect the
burner and furnace for any con-
tamination or blockages.
