ClearWater AQUA ELITE 50 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 20

ClearWater AQUA ELITE 50 Скачать руководство пользователя страница 14

14

P). OZONE INSPECTION

The amazing thing you will notice about the

Aqua Elite 50

system is the clarity of the water.

You might initially notice the water getting cloudy the first couple of days.

DO NOT BE ALARMED. THIS

IS NORMAL!

You will want to clean or backwash your filter after the first week.

Visual Inspection

You will want to periodically inspect the power box in the evening to ensure the unit is
functioning correctly. Turn the system on temporarily, if needed. The indicator light,
located next to the output connector will glow a nice blue color. The ozone unit should
only be on when the pump is running.

To ensure that the venturi injector and bypass are working correctly, simply observe to
see if small bubbles are entering the pool and the “frothing” effect is taking place in the
clear window of the venturi manifold window.

Periodically check the unit intake vent holes for the unlikely event of debris accumulation. It is important these
vent holes are open for air to enter the ozone unit. Do not look directly into the vent holes when the UV bulb is
operating.

Plumbing Issues

Minor adjustment of the ball valve (when installing the manifold) may be required to divert water through the
injector. This may be true with two speed or variable speed pumps. Older versions of these adjustable speed
pumps do not adjust well and you will need to adjust the ball valve to accommodate flow through the venturi on
low speed.

There is an internal check valve in the venturi injector. In the unlikely event this area becomes clogged, it may
be cleaned by removing the nut/barb and a retaining rubber seal. Care should be used not to lose the internal
ball and spring while taking the rubber seal off. Clean and reinstall.

Q). SCHEDULED OZONE MAINTENANCE

Very Important that this is done once a year!

There is very little maintenance required with the

Aqua Elite 50

unit regarding the ozone production, however

we do strongly recommend you replace the ozone hose and the check valves once a year.

The ozone hose and check valves can be easily replaced in a few minutes. A complete package is available that
includes 8 feet of hose, two check valves, 6 hose clamps and 5 zip ties.

Replace ozone hose once a year

Order replacement part –

OZ-HOSEKIT

–

from your dealer. This complete package includes
8 feet of hose, two check valves, 6 hose clamps,
and 5 zip ties.

«
...
12
13
14
15
16
...
»

Содержание AQUA ELITE 50





















Отзывы:

Нет отзывов