Section Description
Page
Product Warranty Information................................................................. 2
®
A)
Identifying the
Scaleblaster
AG
Components...................................... 3
B)
Tools and Materials Required.................................................................. 3
C)
Site Survey............................................................................................... 4, 5
D)
Mounting the Power Box......................................................................... 6
E)
Installing the Signal Cable....................................................................... 6, 7
F)
Powering up the Control Box / Computer............................................... 8
G)
LCD Indicator Screen.............................................................................. 8
Page 3
Table of Contents
A.) Identifying the ScaleBlaster
®
AG Components
®
The ScaleBlaster AG unit includes the following components:
1)
One
ScaleBlaster AG
control box.
2) One roll of 18 gauge (AG-100) or 12 gauge (AG-200, AG-300 &
AG-400) signal wire.
(length to be determined by specific application,
pipe size, and pipe material.)
3) Long nylon cable ties, 5 or 3.
(5 for the AG-100)
or
(3 for the
AG-300 & AG-400)
These ties aid in securing the cable to the pipe.
4) Warranty Card
(along with this Installation & Operations Manual)
5) Shipping Box
. Please save the foam inserts and shipping box, it is made
to protect the descaler during transport and is reusable in case the unit
ever needs servicing at the factory.
AG-200,
1
2
3
4
5
• Bullet Level
• Drill & Drill bits
• Flat Screwdriver
• Phillips Screwdriver
• Screws & Anchors
• Utility Knife
• Voltage Meter
• Wire Stripper
AG-100, AG-200, AG-300 or AG-400
B.) Tools and Materials Required
5 or 3
